DIN-POE10-2456PNNx2
Industrial Gigabit PoE Injector (midspan), 18-57VDC INPUT, 2 port 56VDC 90W PoE OUTPUT, DIN RAIL MOUNT, Passive
Key Specifications/Special Features
- INPUT :
- Input voltage: DC 18V ~ 57V
- Input current: 5.60A at 18Vdc @F.L / 4.20A at 24Vdc @F.L / 1.75A at 57Vdc @F.L
- Input Frequency : 50/60HZ (47 ~ 63Hz)
- OUTPUT :
- Output voltage and current: 56V
- Max load: 1.6A
- Power: 90W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 2%
- Total power: 90W
- Efficiency: 90% min. at DC 24V Input @F.L
- Protection:
- Short-circuit protection
- Output short will not damage the model, it will auto-recover when load back to normal.
- Input with Fuse Protection.
- Over Current Limits : 120% ~ 130% @18V ~ 57Vdc
- Input Reverse Protection------NO Work
- General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90% (40 Degree)
- Free air cooling
- Size: 46 x 125 x 102 mm(W*H*D)
- RJ45 Pin Assignment： 1000M
- RJ-45 input (data only) and RJ-45 output (data & power)
1. the model is isolated design, the output +/- or input +/- can be shorted to ground (FG).
2. The model with 802.3bt output, make sure your end device meet the 802.3bt protocol.
- Indicator:
- The PWR LED: light GREEN means input power OK.
- The LEDs on RJ45s: light GREEN means POE Output –OK
- (Upper for spare pairs, lower for data pairs)
- CONNECTOR FIGURE
- Input: HD-515RC (P2) Allow two inputs for redundant.
