IP67 35W DC/DC Gigabit Industrial PoE Injector, M12 connector, 56V 0.625A Output, 802.3at, -40C~+70C, MIT-96T-1256BDNM-M12-IP67

INPUT :
- Input Voltage: 10Vdc to 36Vdc (Can be used with MS-181-IP67-24-AX)
- Input Current : 4.68A at 10Vdc / 1.31A at 36Vdc
- *Note: The model isolated design, both positive and negative input are all available.
OUTPUT :
- Output voltage and current: 56V
- Max load: 0.625A
- Power: 35W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 35W
- Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 75% min at Full Load , 12Vdc & 24Vdc Input Voltage
Protection:
- Short Circuit Protection
- Ooutput Short GND Terminal will not damage the Power Supply and will Auto-Reset.
- Input with Fuse Protection.
- Safety Standard : meet EN62368-1, EN45545
- EMC : meet FCC Class B , EN55032/EN55035 Class B, EN60945, EN50155.
- PoE : compliant to 802.3at mode B, class 0.
General description:
- Operating temperature: -40 to +70 degree Celsius
- Storage temperature: -40 to +85 degree Celsius
- Operating humidity: 5% - 90% non-condensing
- Free air cooling
- SIZE : 160*106*46 (L*W*H)m/m (without bracket)
Indicates:
- LED(RED) Indicate power on.
- Input connector: The device provides M12 A-Code 5 pin connector on the front panel for input, the pin assignments as the figure.
- M12 X-Code Input (Data Only) and M12 X-Code Output (Data & Power)

Our Products

MIT-96T-1256BDNM-M12-IP67