PSE-SW5G2TB0HM
Hot Merchandise
5-port Gigabit PoE Switch, 24VDC input, combo 3x 56V + 2x 24VDC PoE output, operation temperature -40C~+70C,
Country of Origin:
- Taiwan
- worldwide
- T/T in advance
- 1 Pieces
- Days
Key Specifications/Special Features
Technical Specifications
- Standards: IEEE802.3/IEEE802.3u standards/IEEE802.3ab (10base-T/100base-TX/1000base-T)
- Ports: 5 ports with PoE (4 PSE & 1 PD), support auto-crossover & auto-polarity
- Transmission speed: 1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T) Auto-negotiation
- Switch technology: store-and-forward
- Protocols: CSMA/CD
- Flow control: IEEE802.3x (full-duplex), back pressure (half-duplex)
- Data transmission rate: 1488000pps for 1000base-T, 148800pps for 100base-T, 14880pps for 10base-T
- Address table: 1K MAC address table, self-learning
- Connect: RJ-45
- PoE port:
- Port 1-2, 56V PSE auto power management (Alt B)
- Port 3, 56V 60W passive PoE (Alt A MDI+B)
- Port 4-5, 24V power output (Alt B)
- Maximum PoE power:
- Port 1-2: IEEE802.3at – 35W(802.3at 2 event classification)
- Port 3: 56V 1.07A (60W)
- Port 4-5: 24V 1A (24W)
- PSE disconnect mode: DC disconnect
- PoE auto detection: IEEE802.3af , IEEE802.3at (2 event classification signaling)
- PoE protection: Over-temperature, over-current, over/under voltage
- LEDs:
- *Link/Activity (Green ON/ Green Blinking @1000Mbps, Yellow/Yellow Blinking @10M/100Mbps)
- *PoE (Yellow): port 1-2 ON - PD detect, port3 ON – 56V output, port 4-5 ON – 24V output
- *POWER: Green-normal, Red-24V/56V passive PSE alarm
- Power input: 18V~32VDC input @ rear terminal
- Power consumption: <5W without PD loading
- Power efficiency: 85% at full load (@24V typical)
- Operating temperature: -40℃~ +70℃
- Operation humidity: 90% relative humidity, non-condensing
- Storage temperature: -40℃~+85℃
- Dimension: 40mm(H)x180mm(W)x150mm(D)
