56V/112W Ultra High-power Gigabit PoE Injector with 48V DC Input, -40C~+70C

INPUT :
- Input Voltage: 40Vdc to 72Vdc Normal = 56V
- Input Current : 3.6A at 40Vdc @Full Load / 2.6 A at 56Vdc @Full Load / 2.0 A at 72Vdc @Full Load
OUTPUT :
- Output voltage and current: 56V
- Max load: 2.0A
- Power: 112W maximum
- Minimum load: 0.01A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 112W
- Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Output up to 112W at 50C. De-rate output once above 50C, 100W maximum when 70C
Efficiency: 80% min at Full Load , 40Vdc ~ 72Vdc Input Voltage
Protection:
- Short Circuit Protection
- Ooutput Short GND Terminal will not damage the Power Supply and will Auto-Reset.
- Input with Fuse Protection.
- Safety Standard : meet UL1950, CSA 22.2 &TUV EN60950-1
- EMC : meet FCC Class B , EN55032 Class B
- Over Current : 110% ~ 130% @all DCV Input F.L
- Input Reverse Protection------NO Work
- INPUT LOW Voltage Protection Point : 33.2V±0.3V
- OUTPUT Over Voltage Protection Point : 59V±0.5V
General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% - 90% non-condensing
- Free air cooling
- SIZE : 140*150*40 (L*W*H)m/m
- RJ-45 PoE input (data only) and RJ-45 PoE output (data and power)
Indicates:
- POWER OK the LED2 will be “GREEN”

Our Products

MIT-65G-4856PNN
Store Manager's Choice