Product

Passive
18V PoE Injector with Overload and Short-circuit Protection
Key Specifications/Special Features
  • Function:
    • Transforms AC power to 18V DC power
    • Injects 18V DC through a CAT-5 cable, 4-pin, 5, 7, 8, into remote devices such as wireless AP, IP phone and web camera
  • INPUT :
    • Input voltage: AC 100V ~ 240V 
    • Input current: 0.36A at 120Vac;0.21A at 230Vac
    • Input Frequency: 47-63 hz @Normal 50 ~ 60hz 
  • OUTPUT : 
    • Output voltage and current: 18V
    • Max load: 1A
    • Power: 18W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Total power: 18W
    • Noise bandwidth is from DC to 20Mhz.
    • Ripple & Noise is measured by Paralleling a 0.1Uf metalized capacitor on the test point. 
  • Efficiency: 87% min at Full Load , 120Vac & 230Vac Input Voltage
  • Protection:
    • Short-circuit protected
    • Output Short GND Terminal will not damage the Power Supply and will Auto-Reset.
    • Input with Fuse Protection.
    • High Pot: 4242Vdc, 60Sec, Input Terminal to output Terminal.
    • Meet Level 6 (USA-VI )  
  • General description:
    • Operating temperature: -25 to 50 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5 to 90%
    • Free air cooling
    • Size: 86*78*36 mm (L)*(W)*(H)
  • RJ-45 input (data only) and RJ-45 output (data & power)
  • Indicator:
    •  LED (GREEN) indicates PWR – OK(at has Load)
Loading...
History
    3Inquiry