DC/DC Gigabit PoE Injector with 10-36V DC Input and 48V 0.35A Output, Metal case, -40C~+70C, MIT-69G-1248BDNMH

INPUT :
- Input Voltage: 10Vdc to 36Vdc
- Input Current: 2.52A at 10Vdc / 0.64A at 36Vdc
OUTPUT :
- Output voltage and current: +48V
- Max load: 0.35A
- Power: 17W maximum
- Minimum load: 0.1A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 17W
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 80% min at Full Load , 12Vdc & 24Vdc Input Voltage
Protection:
- Short Circuit Protection
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
- Input with Fuse Protection.
- Safety Standard: meet UL1950, CSA 22.2 & TUV EN60950.
- EMC : meet FCC Class A, EN55032 Class A,
- Over Current : 120% ~ 160% @12Vdc Input F.L
- Input Pin & Reverse Protection------NO Work
- Low input voltage protection: input lower than 8V will cut off the connection.
- Non-isolated I/O
General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% - 90%
- Free air cooling
- Dimensions: metal case (MIT-69G-1248BDNMH): 82*73*35 (L)*(W)*(H)
Indicator:
- Output Ready the LED will be “RED”
- Output 802.3af OK the LED will be “GREEN
Connection:
- RJ45 Connected and pin out: @1000MBASE
- RJ-45 input (data only) and RJ-45 output (data & power)

MIT-69G-1248BDNMH