8-port PoE Switch/Extender, 48VDC input, 7x 802.3at PoE output, 35W/Port, PSE-SW8D

Technical Specifications:

Standards: IEEE802.3/IEEE802.3u standards (10 base-T/100base-T)
Ports: 8 ports with 7 PoE PSE & 1 PoE PD, supports auto-crossover & auto-polarity
Transmission speed: 100 Mbps (100base-T), 10 Mbps(10base-T) Auto-negotiation
Switch technology: store-and-forward
Protocols: CSMA/CD
Flow control: IEEE802.3x (full-duplex), back pressure (half-duplex)
Data transmission rate: 148800pps for 100base-T, 14880pps for 10base-T
Address table: 2K MAC address table, self-learning
Connect: RJ-45
PoE port:
- Port 1-7, Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
- Port 8, 4 pairs PD
Maximum PoE power:
- Port 1-7: IEEE802.3af –16.8W (0.35A/port), IEEE802.3at—35W (0.625A/port), 2 A/port , total 7A Maximum (PSE-SW8S)
- Port 8: 90W (802.3at 2 event classification)
PSE disconnect mode: DC disconnect
PoE auto detection: IEEE802.3af and IEEE802.3at(2 event classification)
PoE protection: over-current, over/under voltage
LEDs:
- *Link/Activity (Green ON/ Green Blinking @100Mbps, Yellow/Yellow Blinking @10Mbps)
- *PoE (Yellow)
  - port 1-7: ON – PD detect
  - Port 8 : ON – 4 pair power, Blinking-2 pair power
- *POWER: Green-normal, Red-alarm
Power input: DC(12V~57V) from rear panel or DC(44V~57V) from port 8 from midspan (or network switch)
Power consumption: 5W when without PD loading
Operating temperature: -40℃~+85℃
Operation humidity: 90% relative humidity, non-condensing
Storage temperature: -40℃~+85℃
Dimension: 40mm(H) x 118mm(W) x 150mm(D) DIN RAIL Mountable

*NOTICE: The product is not comply to LPS requirement, it need to evaluate at final system

PSE-SW8D