MIT-28G-8024A
Ultra High Power DC/AC Gigabit 802.3bt PoE Splitter, 48V PoE Input, 24VAC/80W Output
Country of Origin:
- Taiwan
Key Specifications/Special Features
- INPUT :
- Input voltage: DC40V to DC58V NORMAL= 56V
- OUTPUT :
- Output voltage and current: 24Vac
- Max load: 3.34A
- Power: 80W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Category: Square
- Frequency: 60hz±5hz
- Total power: 80W
- For maximum output of 80W, the input DC power supply should be 100W min.
- PoE input must use all 8 pins. If only 4 pins input are used when power draw up to 80W, the connector will be burnt.
- Maximum current 3.75A(90W) for PTZ moving. the input DC power supply should be 120W/56V min.(@ 100m)
- Efficiency: 85% min @56Vin dc
- Protection:
- Short-circuit protected
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset.
- Over Load Protection is flyback mode , auto-recovery.
- Over Current: 802.3at Limits @All AC Input F.L
- Operation frequency Switch is 70KHZ
- Isolation Voltage : 1500Vdc
- Isolation Resistance :100M ohms (min)
- Input Set class Resistance : 25K ohms
- Maximum Load : 150% over load
- Input Set as an 802.3bt class 8 PD
- General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 140*150*40 mm (L)*(W)*(H)
- Easy installation.
- Can be auto-detected by 802.3at compliant mid-span or Cisco inline-power device.
- Can be injected power from wire 1, 2, 3, 6 or 4, 5, 7, and 8, need all 8 pins for 80W output.
- Output Power & Data -Connected to DTE
- RJ-45 input (data & power) and RJ-45 output (data only)
- 10/100/1000/5000Mbps (5G@CAT6a)
- EMI : Meet FCC Class A Radiation standard, Meet EN55032 Class A Radiation standard
- Indicator:
- LED1 for power input, LED2 for AC output
- If the input is 802.3at/bt PSE
- PoE input on all 4 pairs, LED1 ON, LED2 ON.
- PoE input on 2 pairs (data pairs or spare pairs), LED1 flash, LED2 ON
- If the input is passive PoE
- PoE input on all 4 pairs, LED1 ON, LED2 ON.
- PoE input on 2 pairs (data pairs or spare pairs), LED1 flash, LED2 ON
- If none input or none in valid voltage input, none LED ON.
- PACKAGE:
- Brown box (267 x 160x 45mm),
- 20 pcs/carton , (490x300x370mm) N.W. 7Kg, G.W.: 8Kg, 1.8Cuft.
Main Export Markets
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australia
Our Products
Payment Details
- Payment in Advance
