Product

802.3bt PoE <=150W
PoE Splitter with Overload and Short-circuit Protections
Key Specifications/Special Features
  • INPUT :
    • Input Voltage: DC-40V to DC-60V NORMAL= 56V  
  • OUTPUT : 
    • Output voltage and current:  12V 
    • Max load: 6.67A
    • Power: 80W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Total power: 80W
    • For maximum output of 80W, the input DC power supply should be 100W minmetalize capacitor on the test point. 
    • PoE input must use all 8 pins. If only 4 pins input are used when power draw up to 80W, the connector will be burnt.
  • Efficiency:  85% min @ 56Vin dc
  • Protection:
    • Short Circuit Protection
    • Ooutput Short GND Terminal will not damage the Power Supply and will Auto-Reset. Over Load Protection is flyback mode , auto-recovery. 
    • Operation frequency Switch is 70KHZ
    • Isolation Voltage : 1500Vdc
    • Isolation Resistance :100M ohms (min)
    • Input identify class Resistance : 25K ohms
    • Input setting IEEE 802.3bt class 8.
    • Maximum Load : 150% over load
    • EMC : Meet FCC Class A Radiation standard Meet EN55032 Class A Radiation standard
  • General description
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5% - 90% non-condensing
    • Free air cooling
    • SIZE : 140*150*40 (L*W*H)m/m 
    • RJ-45 PoE input (data and power) and RJ-45 PoE output (data only)
    • the model is isolated design, the output +/- or input +/- can be shorted to ground (FG). 
  • Indicates:
    • *.Detection 802.3bt, power input on all P1~P8.
    • *.Detection dual signal.(1,2/3,6), (4,5/7,8)
    • POE INPUT = POEat input 56V(1,2/3,6)(4,5/7,8)  LED = GREEN
    • POE INPUT = 56V on only (1,2/3,6)  LED = GREEN (Flash)
    • POE INPUT = 56V on only (4,5/7,8)  LED = GREEN (Flash)
History
    3Inquiry