MIT-28G-8012D
Ultra High Power PoE Splitter with 48VDC PoE Input and 80W 12VDC Output, 802.3bt compliant
Country of Origin:
- Taiwan
Key Specifications/Special Features
- INPUT :
- Input Voltage: DC-40V to DC-60V NORMAL= 56V
- OUTPUT :
- Output voltage and current: 12V
- Max load: 6.67A
- Power: 80W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Total power: 80W
- For maximum output of 80W, the input DC power supply should be 100W minmetalize capacitor on the test point.
- PoE input must use all 8 pins. If only 4 pins input are used when power draw up to 80W, the connector will be burnt.
- Efficiency: 85% min @ 56Vin dc
- Protection:
- Short Circuit Protection
- Ooutput Short GND Terminal will not damage the Power Supply and will Auto-Reset. Over Load Protection is flyback mode , auto-recovery.
- Operation frequency Switch is 70KHZ
- Isolation Voltage : 1500Vdc
- Isolation Resistance :100M ohms (min)
- Input identify class Resistance : 25K ohms
- Input setting IEEE 802.3bt class 8.
- Maximum Load : 150% over load
- EMC : Meet FCC Class A Radiation standard Meet EN55032 Class A Radiation standard
- General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% - 90% non-condensing
- Free air cooling
- SIZE : 140*150*40 (L*W*H)m/m
- RJ-45 PoE input (data and power) and RJ-45 PoE output (data only)
- the model is isolated design, the output +/- or input +/- can be shorted to ground (FG).
- Indicates:
- *.Detection 802.3bt, power input on all P1~P8.
- *.Detection dual signal.(1,2/3,6), (4,5/7,8)
- POE INPUT = POEat input 56V(1,2/3,6)(4,5/7,8) LED = GREEN
- POE INPUT = 56V on only (1,2/3,6) LED = GREEN (Flash)
- POE INPUT = 56V on only (4,5/7,8) LED = GREEN (Flash)
Main Export Markets
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australia
Our Products
Payment Details
- Payment in Advance
