Product

802.3bt PoE <=150W
PoE Splitter with 48V DC/80W Output, Measures 116 x 159 x 40mm
Key Specifications/Special Features
  • INPUT :
    • Input Voltage: DC-40V to DC-60V NORMAL= 56V
  • OUTPUT : 
    • Output voltage and current:  48V 
    • Max load: 1.67A
    • Power: 80W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Total power: 80W
    • For maximum output of 80W, the input DC power supply should be 100W minmetalize capacitor on the test point. 
    • PoE input must use all 8 pins. If only 4 pins input are used when power draw up to 80W, the connector will be burnt.
  • Efficiency:  85% min @ 56Vin dc
  • Protection:
    • Short Circuit Protection
    • Ooutput Short GND Terminal will not damage the Power Supply and will Auto-Reset. Over Load Protection is flyback mode , auto-recovery. 
    • Operation frequency Switch is 70KHZ
    • Isolation Voltage : 1500Vdc
    • Isolation Resistance :100M ohms (min)
    • Input identify class Resistance : 25K ohms
    • Input Set as 802.3bt class 8 PD.
    • Maximum Load : 150% over load
    • EMC : Meet FCC Class A Radiation standard, Meet EN55032 Class A Radiation standard 
  • General description
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5% - 90% non-condensing
    • Free air cooling
    • SIZE : 140*150*40 (L*W*H)m/m  DIN rail mountable 
    • 10/100/1000/5000M (5G@CAT6A) 
    • RJ-45 PoE input (data and power) and RJ-45 PoE output (data only)
  • Indicates:
    • LED1 for power input, LED2 for DC output
    • If the input is 802.3at/bt PSE
      • PoE input on all 4 pairs, LED1 ON, LED2 ON.
      • PoE input on 2 pairs (data pairs or spare pairs), LED1 flash, LED2 ON
    • If the input is passive PoE
      • PoE input on all 4 pairs, LED1 ON, LED2 ON.
      • PoE input on 2 pairs (data pairs or spare pairs), LED1 flash, LED2 ON
    • If none input or none in valid voltage input, none LED ON. 
History
    3Inquiry