4 port Gigabit PoE Injector with 44~57VDC Input and 802.3at 35W Per Port output, MIT-44GD

MIT-44GS is a DC/DC PoE (Power-over-Ethernet) injector, provide up to four different voltage DC input and four different voltage PoE output, output power maximum 2A/port, data rate can be 10M/100M/1000M
Polarity of each PoE output can be reversed if you need to reverse the output polarity
This manual will help you to install and setting the PoE injector
Installation of the PoE injector is very easy and you can start to use the product as soon as you are powered up
The bottom ports 1-4 on the front panel are used for carry PoE output
Normally as detailed below:
- Data pair A on line 1 and 2
- Data pair B on line 3 and 6
- Data pair C plus V+ on line 4 and 5
- Data pair D plus V- on line 7 and 8
Data rate: 10M/100M/1000Mbps
Input voltage: -44 to -57V DC
Maximum PoE power: current limited – 35W/port
PoE protection: over-current, over/under voltage
LEDs: green-PD detect, red-power ready, off-No power apply
Operating temperatures: -40 to 70℃
Operation humidity: 90% relative humidity, non-condensing
Storage temperatures: -40 to 85℃
Dimensions: 40 x 118 x 90mm, available for DIN RAIL mounted

Our Products

MIT-44GD