DIN-POE9-56PNN
Industrial DIN RAIL MOUNT Gigabit PoE Injector, AC100-350V INPUT, 56V 60W 4 pairs output,
Key Specifications/Special Features
- INPUT :
- Input voltage: AC : 100V ~350V @120V/230V
- Input current: 0.85A @120Vac at F.L / 0.44A @230Vac at F.L
- Input Frequency : 50/60HZ (47 ~ 63Hz)
- OUTPUT :
- Output voltage and current: 56V
- Max load: 1.07A
- Power: 60W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 2%
- Total power: 60W
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 82% min at Full Load , 120Vac Input Voltage
- Protection:
- Short-circuit protection
- Output Short GND Terminal will not damage the Power Supply and will auto-Reset.
- Input with Fuse Protection.
- Safety Standard: meet UL1950, CSA 22.2 &TUV EN60950-1.
- EMC : meet FCC Class B , EN55022 Class B
- Over Current : 120% ~ 150% @ 100Vac~272Vac Input F.L
- Input polarity Reverse Protection----NO output
- Output Over Voltage Protection : 59V ~ 65V Turn-off
- General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 46 x 125 x 102 mm(W*H*D)
- RJ45 Pin Assignment: 10M/100M/1000M
- RJ-45 input (data only) and RJ-45 output (data & power)
- Indicator:
- Indicators (on front panel, output RJ45 )
- LED1 (upper) RED indicates PWR – Ready
- LED2 (lower) GREEN indicates POE Output –OK
- (when LED2 light on, LED1 turn off at the same time)
- CONNECTOR FIGURE
- Input: HD-515RC (P2)