Key Specifications/Special Features
- Input voltage: 10 to 60V DC
- Input current: 8.5A@10Vin at F.L ; 7.0A@12Vin at F.L ; 3.45A@24Vin at F.L ; 1.73A@48Vin atF.L ; 1.35A @60Vin at F.L
- Output voltage and current:
-
| Model number |
DIN-POE5-56D |
DIN-POE5-56 |
DIN-POE5-48D |
DIN-POE5-48 |
DIN-POE5-24 |
| OUTPUT |
56V |
56V |
48V |
48V |
24V |
| Max. load |
1.25A |
1.25A |
1.45A |
1.45A |
2.91A |
| Power |
70W Max. |
70W Max. |
70W Max. |
70W Max. |
70W Max. |
| Min. load |
0A |
0A |
0A |
0A |
0A |
| Load reg. % |
5% |
5% |
5% |
5% |
5% |
| Line reg. % |
1% |
1% |
1% |
1% |
1% |
| Ripple % |
1% |
1% |
1% |
1% |
1% |
| Noise % |
1% |
1% |
1% |
1% |
1% |
Note 1: Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Note 2: Output up to 70W at 40C. De-rate output power by 1W for every 1 deg C rise above 40C up to 70C. Example: 60W at 50C, 50W at 60C, 40W at 70C
- EFFICIENCY : 80% min at Full Load , 10Vdc ~ 60Vdc Input Voltage
- Short Circuit Protection Output
- Short GND Terminal will not damage the Power Supply and will auto-Reset.
- Input with Fuse Protection.
- Over Current : 110% ~ 120% @all DCV Input F.L
- Input polarity Reverse Protection---- will not damage the Power Supply, NO work.
- Input Over low Voltage Protection : 8V ~ 9V Turn-off Input
- Indicators (on front panel, output RJ45)
LED1 (upper) GREEN indicates PSE Output –OK (4,5/7,8)
LED2 (lower) GREEN indicates PSE Output –OK (1,2/3,6) PWR PSE ready
- Operation Temperature: -40 - +70 Degree
- Storage Temperature: -40 - +85 Degree
- Operation Humidity: 5% - 90%
- Free air cooling
- Size: 46 x 125 x 102mm
- The model is isolated design, the output +/- or input +/- can be shorted to ground (FG).
- Dual DC power input
- Output: RJ45 connector
- RJ-45 input (data only) and RJ-45 output (data and power)
