Product

24VAC PoE
24VAC Input 70W Output High-power PoE Injector with Overload Protection
Key Specifications/Special Features
  • INPUT :
    • Input voltage: 22Vac to 35Vac Normal = 24Vac
    • Input current: 7.80A at 24Vac/50hz F.L; 8.47A at 22Vac/50hz F.L; 5.15A at 35Vac/50hz F.L
    • Input Frequency: 50/60hz 
    • Power Factor: >0.53(at F.L) suggest : initial add Inductor
  • OUTPUT : 
    • Output voltage and current: +56V1 (12-/36+) ,+56V2 (45+/78-)
    • Max load: 0.625A
    • Power: 35W maximum
    • Minimum load: 0.01A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Total power: 70W
    • Noise bandwidth is from DC to 20Mhz.
    • Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point. 
  • Efficiency: 80% min at Full Load , 22Vac ~ 35Vac Input Voltage 
  • Protection:
    • Short-circuit protected
    • Output Short GND Terminal will not damage the Power Supply and will Auto-Reset. 
    • Input with Fuse Protection. 
    • Over Current:  802.3at Limits @All AC Input F.L
  • Safety Standard : meet UL1950, CSA 22.2 & TUV EN60950-1
  • EMC : meet FCC Class B , EN55032 Class B 
  • General description:
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5 to 90%
    • Free air cooling
    • Size: 125*72*38 mm (L)*(W)*(H)
    • DIN rail mountable : DIN rail clip kit optioned
  • RJ45 Pin Assignment: @1000M
  • RJ-45 input (data only) and RJ-45 output (data & power)
History
    3Inquiry