Product

802.3bt PoE ~150W
70W POE Injector with 56V DC Output Dual Detection and 85% Minimum Efficiency
Key Specifications/Special Features
  • INPUT :
    • Input voltage: AC 100V ~ 240V ±10%
    • Input Frequency: 50 ~ 60hz
    • Input current: 1.21A at 100Vac @F.L / 0.78A at 240Vac @F.L
    • Inrush current: 25A max at 120Vac & 60A max at 230Vac 
  • OUTPUT : 
    • Output voltage and current: +56V
    • Max load: 1.34A
    • Power: 75W maximum
    • Minimum load 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 2%
    • Total power: 75W
    • Ripple & Noise bandwidth is from DC to 20Mhz.
    • Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity. 
  • Efficiency: 88% min. at AC 120V Input @F.L
  • Protection:
    • Short-circuit protected
    • Output Short GND Terminal will not damage the Power Supply
    • Auto Recover when Load status going to normally
    • Over Voltage Protection : 59V ~ 65V 
    • Over Current limit:  PSE Maximum Delivered Power, Per-Port(Table1 & 2)
    • LED indicates : JP2 
    • Hold up time: 6mS min. at maximum load &120Vac Input. 
  • EMC: EN55032 Class A, FCC Class A
  • SAFETY: IEC60950-1, EN 60950-1 (2nd Edition)
  • General description:
    • Operating temperature: -25 to 50 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5% - 90%RH (non-condensing) 
    • Free air cooling
    • Size: 90*118*40 mm (L)*(W)*(H) DIN rail mountable
  • RJ45 pin assignment: @5G BASE 
  • RJ-45 input (data only) and RJ-45 output (data & power)
History
    3Inquiry