AC/DC, 5G, 802.3bt POE Injector with 56VDC 75W Output , power on all 4 pairs, MIT-88G-56D-BT

INPUT :
- Input voltage: AC 100V ~ 240V ±10%
- Input Frequency: 50 ~ 60hz
- Input current: 1.21A at 100Vac @F.L / 0.78A at 240Vac @F.L
- Inrush current: 25A max at 120Vac & 60A max at 230Vac
OUTPUT :
- Output voltage and current: +56V
- Max load: 1.34A
- Power: 75W maximum
- Minimum load 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 2%
- Total power: 75W
- Ripple & Noise bandwidth is from DC to 20Mhz.
- Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity.
Efficiency: 88% min. at AC 120V Input @F.L
Protection:
- Short-circuit protected
- Output Short GND Terminal will not damage the Power Supply
- Auto Recover when Load status going to normally
- Over Voltage Protection : 59V ~ 65V
- Over Current limit: PSE Maximum Delivered Power, Per-Port(Table1 & 2)
- LED indicates : JP2
- Hold up time: 6mS min. at maximum load &120Vac Input.
EMC: EN55032 Class A, FCC Class A
SAFETY: IEC60950-1, EN 60950-1 (2nd Edition)
General description:
- Operating temperature: -25 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% - 90%RH (non-condensing)
- Free air cooling
- Size: 90*118*40 mm (L)*(W)*(H) DIN rail mountable
RJ45 pin assignment: @5G BASE
RJ-45 input (data only) and RJ-45 output (data & power)

Our Products

MIT-88G-56D-BT