Product

802.3bt PoE ~150W
112W POE Injector with 56V DC Output Dual Detection and 88% Minimum Efficiency
Key Specifications/Special Features
  • INPUT :
    • Input voltage: AC 100V ~ 240V ±10%
    • Input current: 0.9A at 120Vac @F.L PF > 0.98 ; 0.5A at 230Vac @F.L PF > 0.95
    • Input Frequency: 47 ~ 63hz
    • Inrush current: 25A Max at 120Vac & 50A Max at 230Vac
  • OUTPUT : 
    • Output voltage and current: +56V
    • Max load: 1.6A
    • Power: 90W maximum
    • Minimum load 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 2%
    • Total power: 90W
    • Ripple & Noise bandwidth is from DC to 20Mhz.
    • Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity. 
  • Efficiency: 90% min. at AC 120V Input @F.L ; 90% min. at AC 240V Input @F.L
  • Protection:
    • Short-circuit protected
    • Output Short GND Terminal will not damage the Power Supply
    • Auto Recover when Load status going to normally
    • Over Voltage Protection : 58V ~ 60V 
    • Over Current limit: 120% ~ 150% @100V ~ 240Vac
    • LED Indicate SENSE – OK
  • SAFETY STANDARD : Meet EN60950-1 
  • Hold up time :8mS min. at maximum load &120Vac Input. 
  • General description:
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5 to 90%
    • Free air cooling
    • Size: 140*150*40 mm (L)*(W)*(H)
  • RJ45 Pin Assignment: @1000M/5000M @CAT6A
  • RJ-45 input (data only) and RJ-45 output (data & power)
  • Indicator:
    • LED1, 2 (RED) Indicate POE Output no valid detection. 
    • LED1, 2 (GREEN) Indicate POE Output detected.
History
    3Inquiry