PSE-SW5B-IPRJ
Store Manager's Choice
Outdoor PoE Switch/Extender in IP66 waterproof Anti-UV plastic box, 11-60VDC input, 4 port 802.3at PoE output
Key Specifications/Special Features
- Technical Specifications
♦ Standards：IEEE802.3/IEEE802.3u standards/IEEE802.3ab (10base-T/100base-TX/1000base-T)
♦ Ports：5 ports with PoE (4 PSE & 1 PD), support auto-crossover & auto-polarity
♦ Transmission speed：1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T) Auto-negotiation
♦ Switch technology：store-and-forward
♦ Protocols：CSMA/CD
♦ Flow control：IEEE802.3x (full-duplex), back pressure (half-duplex)
♦ Data transmission rate：1488000pps for1000base-T, 148800pps for 100base-T, 14880pps for 10base-T
♦ Address table：2K MAC address table, self-learning
♦ Connect：M20 RJ-45(KINSUN: 3352K10E40; mating part: 3352LXXXXX), M20 4Pin Plug(Neltron:120620-04P-FA02T-PM13; mating part: 120620-XXS-FA02-MM)
♦ PoE port：Port 1-4, PSE auto power management
• Pin assignment:
data pair A plus V-(1,2),
data pair B plus V+(3,6),
data pair C plus V+(4,5),
data pair D plus V-(7,8)
• Port 5, 4 pairs PD
♦ PoE power Output Max. ：
• from Port 5: af–16.8W x4 / at–35W x2 / bt–60W(Type3) x1 (total:71W)
• from from M20 4Pin Plug: at–35W x4 or bt–75W x2 (total:150W)
♦ PoE power Input(Port 5) ：
• Active: 71W min. for system, Current limited –1.62A@44-57V (compliant to 802.3af/at/bt classification at 90W PSE input.)
• Passive: Current limited –2.0Amax.@44-57V
♦ PSE disconnect mode：DC disconnect
♦ PoE auto detection： IEEE802.3af , IEEE802.3at (2 event classification signaling) & IEEE802.3bt(multi-event classification)
♦ PoE protection：Over-temperature, over-current, over/under voltage & Surge Protection on data pairs
♦ LEDs：
• Link/Activity (Green ON/ Green Blinking @1000Mbps, Yellow/Yellow Blinking @10M/100Mbps)
*PoE (Yellow)
port 1-4 ON-PD detect
Port 5 ON – 4 pair power, Blinking-2 pair power
*POWER Green-normal, Red-alarm
♦ Power input：PoE source on Port 5 (UPLINK), and/or optional DC power supply on rear terminal. It's with input low voltage protection, if input voltage lower than 9.4V, the unit will be shut down.
♦ Power consumption：less than 5W when without PD loading
♦ Power efficiency：85% at full load (@24V typical)Input PSE-SW5B15DBHM 12V 291mA/3.492W 24V 140mA/3.36W 48V 67.2mA/3.226W
♦ Operating temperature：-20℃~ +50℃
♦ Storage temperature：-40℃~ +85℃
♦ Operation humidity 90% relative humidity, non-condensing with conformal coating
♦ Size: 268(W)x207(H)x88(L)mm, With 6”hose clamp for light pole mounting
Main Export Markets
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australia
Our Products
Payment Details
- Payment in Advance
