10-15VDC Input 45W Output High-power PoE Injector operation temperature -40C~+50C, Compliant to 802.3bt and UPOE, MIT-20G-1256DBNN

INPUT :
- Input Voltage: 10Vdc to 15Vdc Normal = 12V
- Input Current: 4.75A at 12Vdc @ Full Load
OUTPUT :
- Output voltage and current: +56V
- Max load: 0.81A
- Power: 45W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 45W
- Noise bandwidth is from DC to 20Mhz
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 80% min at Full Load , 10Vdc ~ 15Vdc Input Voltage
Protection:
- Short Circuit Protection
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
- Input with Fuse Protection.
- Safety Standard : meet IEC/EN62368-1
- EMC : meet FCC Class B , EN55032 Class B
- Over Current : 802.3bt Limits @All DC Input F.L
- Input Reverse Protection------NO Work
General description:
- Operating temperature: -40 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% - 90% non-condensing
- Free air cooling
- SIZE : 125*72*38 (L)*(W)*(H) unit: m/m
- DIN rail mountable : DIN rail clip kit optioned
- RJ45 Pin Assignment： @1000M
- RJ-45 PoE input (data only) and RJ-45 PoE output (data and power)
Indicates:
- the LED on top cover light GREEN when Power Ready
- the LEDs on right RJ45 light GREEN when powering to 802.3at PD, the left LED ON means the data pairs powering, the right LED ON means the spare pairs powering. If no valid PD be connected, the two LEDs light off.

Our Products

MIT-20G-1256DBNN