Product

802.3bt PoE <=150W
24VDC Input 70W Output High-power PoE Injector with Overload Protection
Key Specifications/Special Features
  • INPUT :
    • Input Voltage: 18Vdc to 36Vdc Normal = 24V
    • Input Current: 3.65A at 24Vdc @ Full Load   
  • OUTPUT : 
    • Output voltage and current:  +56V1
    • Max load: 1.25A
    • Power: 70W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Total power: 70W
    • Noise bandwidth is from DC to 20Mhz
    • Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point. 
  • Efficiency:  80% min at Full Load , 18Vdc ~ 36Vdc Input Voltage  
  • Protection:
    • Short Circuit Protection
    • Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
    • Input with Fuse Protection.
    • Safety Standard : meet IEC/EN62368-1
    • EMC : meet FCC Class B , EN55032 Class B
    • Over Current : 110% ~ 130% @All DC Input F.L
    • Input Reverse Protection------NO Work 
  • General description
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5% - 90% non-condensing
    • Free air cooling
    • SIZE : 125*72*38 (L)*(W)*(H) unit: m/m
    • DIN rail mountable : DIN rail clip kit optioned
    • RJ45 Pin Assignment: @1000M 
    • RJ-45 PoE input (data only) and RJ-45 PoE output (data and power)
  • Indicates:
    • the LED on top cover light GREEN when Power Ready
    • the LEDs on right RJ45 light GREEN when powering to 802.3at PD, the left LED ON means the data pairs powering, the right LED ON means the spare pairs powering. If no valid PD be connected, the two LEDs light off. 
History
    3Inquiry