Product

24VAC PoE
24VAC Input 70W Output High-power PoE Injector with Overload Protection
Key Specifications/Special Features
  • INPUT :
    • Input voltage: 22Vac to 35Vac Normal = 24Vac ; 20Vdc to 48Vdc Normal = 24Vdc
    • Input current: 4.42A at 24Vac/50hz F.L ; 4.82A at 22Vac/50hz F.L ; 3.12A at 35Vac/50hz F.L ; 4.40A at 24Vdc F.L
    • Input Frequency: 50/60hz 
    • Power Factor: >0.95(at F.L)
  • OUTPUT : 
    • Output voltage and current: +56V
    • Max load: 1.6A
    • Power: 90W 
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Total power: 90W
    • Noise bandwidth is from DC to 20Mhz.
    • Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point. 
  • Efficiency: 80% min at Full Load , 22Vac ~ 35Vac Input Voltage 
  • Protection:
    • Short-circuit protected
    • Output Short GND Terminal will not damage the Power Supply and will Auto-Reset. 
    • Input with Fuse Protection. 
    • Over Current:  802.3bt Limits @All AC Input F.L
  • Safety Standard : meet EN62368-1
  • EMC : meet FCC Class B , EN55032 Class B 
Warning : Input Fuse(T6.3A-125V) Must be installed at Line and Line. (The fuse must be installed on one of the wires.) The ground of the power supply must be connected to the ground of the load, and also to the ground of the machine
 
  • General description:
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5 to 90%
    • Free air cooling
    • Size: 140*150*40 (L*W*H)m/m DIN rail mountable
    • For AC input: use AC1 (pin3(L),5(N)) to input AC or use AC2 (pin 2(L),4(N)) to input AC.
    • For DC input: Use pin 4 or 5 and pin 2 or 3 to input DC, no matter what polarity, there is bridge inside. 
  • Indication:
    • LED1(RED) Indicate POE Output no valid detection.
    • LED2(GREEN) Indicate POE Output 802.3af/at/bt PD detected
  • RJ45 Pin Assignment: @1000M/5000M
  • RJ-45 input (data only) and RJ-45 output (data & power)
History
    3Inquiry