DIN-POE5-56DBN
DC/DC 802.3bt 5 Gigabit PoE Injector, DC 10V~60V INPUT, 56V output, 70W 802.3bt, -40C~+50C
Key Specifications/Special Features
- INPUT :
- Input voltage: DC 10V ~ 60V
- Input current: 8.20A @10Vin at F.L / 6.84A @12Vin at F.L / 3.42A @24Vin at F.L / 1.70A @48Vin at F.L / 1.36A @60Vin at F.L
- OUTPUT :
- Output voltage and current: +56V
- Max load: 1.25A
- Power: 70W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 86% min at Full Load , 10Vdc ~ 60Vdc Input Voltage
- Protection:
- Short-circuit protected
- Output Short GND Terminal will not damage the Power Supply and will auto-Reset.
- Input with Fuse Protection.
- Over Current : 110% ~ 120% @all DCV Input F.L
- Input polarity Reverse Protection---will not damage the Power Supply, NO work.
- Input Over low Voltage Protection : 8V ~ 9V Turn-off Input
- Surge protection on data input ports
- General description:
- Operating temperature: -40 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 46 x 125 x 102 mm (W*H*D)
- RJ45 pin out assignment: (10M/100M/1000M/5000M)
- RJ-45 input (data only) and RJ-45 output (data & power) all 4 pairs
- Note : the model is isolated design, the output +/- or input +/- can be shorted to ground (FG).
- CONNECTOR FIGURE :
- Input : HD-515R8C 5P (P1) Allow two inputs for redundant.
- Indicator:
- Indicators (on front panel, output RJ45 )
- JP3 (upper) GREEN indicates 802.3bt Output –OK
- LED1 PWR PSE ready
