DC/DC Gigabit PoE Injector, DC11V~60V INPUT, 56V 90W Output, 802.3bt, -40C~+70C, DIN-DC95-56DBN

INPUT :
- Input voltage: DC 11V ~ 60V
- Input current: 10.6A @11Vin at F.L / 9.7A @12Vin at F.L / 4.84A @24Vin at F.L / 2.42A @48Vin at F.L / 1.94A @60Vin at F.L
OUTPUT :
- Output voltage and current: +56V
- Max load: 1.67A
- Power: 90W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 90% min at Full Load , 11Vdc ~ 60Vdc Input Voltage
Protection:
- Short-circuit protected
- Output Short GND Terminal will not damage the Power Supply and will auto-Reset.
- Input with Fuse Protection.
- Over Current : 802.3bt Class 8(96.6W) @all DCV Input F.L
- Input polarity Reverse Protection---will not damage the Power Supply, NO work.
- Input Over low Voltage Protection : 8V ~ 9V Turn-off Input
- Surge protection on data input ports
General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 66 x 125 x 102 mm (W*H*D)
RJ45 pin out assignment: (10M/100M/1000M)
RJ-45 input (data only) and RJ-45 output (data & power)
Note : the model is isolated design.
CONNECTOR FIGURE :
- Input : 5EHDRM-5P (P1) Allow two inputs for redundant.
Indicator:
- Indicators (on front panel, output RJ45 )
- JP3 GREEN indicates PSE 802.3bt Output –OK
- LED1 PWR PSE ready

DIN-DC95-56DBN