Product

DIN PoE
Key Specifications/Special Features
  • INPUT :
    • Input voltage: DC 11V ~ 60V 
    • Input current: 10.6A @11Vin at F.L / 9.7A @12Vin at F.L / 4.84A @24Vin at F.L / 2.42A @48Vin at F.L / 1.94A @60Vin at F.L
  • OUTPUT : 
    • Output voltage and current: +56V
    • Max load: 1.67A
    • Power: 90W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Noise bandwidth is from DC to 20Mhz. 
    • Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point. 
  • Efficiency: 90% min at Full Load , 11Vdc ~ 60Vdc Input Voltage
  • Protection:
    • Short-circuit protected
    • Output Short GND Terminal will not damage the Power Supply and will auto-Reset.
    • Input with Fuse Protection. 
    • Over Current :  802.3bt Class 8(96.6W) @all DCV Input F.L
    • Input polarity Reverse Protection---will not damage the Power Supply, NO work.
    • Input Over low Voltage Protection : 8V ~ 9V Turn-off Input
    • Surge protection on data input ports
  • General description:
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5 to 90%
    • Free air cooling
    • Size: 66 x 125 x 102 mm (W*H*D)
  • RJ45 pin out assignment: (10M/100M/1000M)
  • RJ-45 input (data only) and RJ-45 output (data & power)
  • Note : the model is isolated design. 
  • CONNECTOR FIGURE :
    • Input : 5EHDRM-5P (P1) Allow two inputs for redundant. 
  • Indicator:
    • Indicators (on front panel, output RJ45 )
    • JP3 GREEN indicates PSE 802.3bt Output –OK
    • LED1 PWR PSE ready 
History
    3Inquiry