MIT-98G-A2448BDNM
AC/DC 802.3af Gigabit PoE Injector with 22-30V AC Input Voltage and 0.35A Maximum Load
Brand Name:
- MSE
Key Specifications/Special Features
- INPUT :
- Input Voltage: 22Vac to 30Vac Normal = 24Vac
- Input Current: 1.70A at 22Vac/50hz F.L ; 1.53A at 24Vac/50hz F.L ; 1.23A at 30Vac/50hz F.L
- Input Frequency : 50/60hz
- Power Factor: >0.56(at F.L) suggest : initial add Inductor.
- OUTPUT :
- Output voltage and current: +48V
- Max load: 0.35A
- Power: 16.8W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 16.8W
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 75% min at Full Load , AC Input Voltage
- Protection:
- Short Circuit Protection
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
- Input with Fuse Protection.
- Safety Standard: meet EN62368-1, EN45545.
- EMC : meet FCC Class B , EN55032 Class B, EN60945, EN50155
- Over Current : 802.3af Limits @All AC Input F.L
- Input Pin & Reverse Protection------NO Work
- General description:
- Operating temperature: -40 - +50 degree Celsius
- Storage temperature: -40 - +85 degree Celsius
- Operating humidity: 5% - 90%
- Free air cooling
- Dimensions: Metal case 82*56*33 (L)*(W)*(H)
- Warning : Input Fuse(T3.15A-125V) Must Installation at Line and Line. (The fuse must be installed on one of the wires.) It is strongly recommended to install an inductor at the input (minimum 1mH) The ground of the power supply must be connected to the ground of the load, and also to the ground of the machine.
- Indicator:
- Output Ready the LED will be “RED”
- Output 802.3af OK the LED will be “GREEN
- Connection:
- RJ45 Connected and pin out: @5000Mbps
- RJ-45 input (data only) and RJ-45 output (data & power)
Main Export Markets
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australia
Our Products
Payment Details
- Payment in Advance
