DC/DC 5G/10G PoE Injector with 40-60VDC Input and 56V/0.625A Output, MIT-96T-4856BDNM

INPUT :
- Input Voltage: 40Vdc to 60Vdc
- Input Current: 1.17A at 40Vdc / 0.79A at 60Vdc
OUTPUT :
- Output voltage and current: +56V
- Max load: 0.625A
- Power: 35W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 35W
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 75% min at Full Load , 48Vdc Input Voltage
Protection:
- Short Circuit Protection
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
- Input with Fuse Protection.
- Safety Standard: meet EN62368-1, EN45545.
- EMC : meet FCC Class B , EN55032 Class B, EN60945, EN50155
- Over Current : 802.3at Limits @ 40~60Vdc Input F.L
- Input Pin & Reverse Protection------NO Work
General description:
- Operating temperature: -40 - +70 degree Celsius
- Storage temperature: -40 - +85 degree Celsius
- Operating humidity: 5% - 90%
- Free air cooling
- Dimensions: Metal case 122.5*74*33(L*W*H)m/m DIN rail mountable
Indicator:
- power ready: YELLOW on
- 802.3at output: GREEN on
Connection:
- RJ45 Connected and pin out: @5Gbps(CAT6A)
- RJ-45 input (data only) and RJ-45 output (data & power)
- Note: (1) the model is isolated design. (2) 5Gbps@100m/70C; 10Gbps@50m/25C

Our Products

MIT-96T-4856BDNM