MIT-89G-4856D-BT-M12-IP67
IP67 90W DC/DC Gigabit PoE Injector M12 connector, 56V 1.61A Output, 802.3bt, -40C~+70C
Key Specifications/Special Features
- INPUT :
- Input Voltage: 40Vdc to 60Vdc Normal = 56V (Can be used with MS-181-IP67-56-AX)
- Input Current : 2.6A at 40Vdc @Full Load / 1.9A at 56Vdc @Full Load / 1.8A at 60Vdc @F.L
- *Note: The model isolated design, both positive and negative input are all available.
- OUTPUT :
- Output voltage and current: 56V
- Max load: 1.61A
- Power: 90W maximum
- Minimum load: 0.01A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 90W
- Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 80% min at Full Load , 40Vdc ~ 60Vdc Input Voltage
- Protection:
- Short Circuit Protection
- Ooutput Short GND Terminal will not damage the Power Supply and will Auto-Reset.
- Input with Fuse Protection.
- Safety Standard : design to meet EN62368-1.
- EMC : design to meet FCC Class A , EN55032 Class A
- Over Current : 802.3BT Class 8 (96.6W)@All DC Input F.L
- Input Reverse Protection------NO Work
- INPUT LOW Voltage Protection Point : 33.2V±0.3V
- OUTPUT Over Voltage Protection Point : 59V±0.5V
- General description:
- Operating temperature: -40 to +70 degree Celsius
- Storage temperature: -40 to +85 degree Celsius
- Operating humidity: 5% - 90% non-condensing
- Free air cooling
- SIZE : 127*220*46 (L*W*H)m/m (without bracket)
- Indicates:
- LED(RED) Indicate power on.
- Input connector: The device provides M12 A-Code 5 pin connector on the front panel for input, the pin assignments as the figure.
- M12 X-Code Input (Data Only) and M12 X-Code Output (Data & Power)
Main Export Markets
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australia
Our Products
Payment Details
- Payment in Advance
