DIN-PS100-56DBN
AC/DC 802.3bt 5 Gigabit PoE Injector, 100-240VAC Input, 56V output, 90W 1.6A, -40C~+50C
Key Specifications/Special Features
- INPUT :
- Input voltage: AC 100V ~ 240V
- Input current: 1.10A at 100Vac @F.L PF > 0.98 0.46A at 240Vac @F.L PF > 0.95
- Input frequency : 50/60Hz
- OUTPUT :
- Output voltage and current: +56V
- Max load: 1.6A
- Power: 90W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 88% min at Full Load , 100Vac ~ 240Vac Input Voltage
- Protection:
- Short-circuit protected
- output Short GND Terminal will not damage the Power Supply will AutoRecover when Load status going to normally
- Over Voltage Protection : 58V ~ 63V
- Over Current Limits : 802.3bt Limits @100V ~ 240Vac
- EMC : Meet FCC Class A EN55032 Class A
- SAFETY STANDARD : Meet EN60950-1
- Hold up time :8mS min. at maximum load &120Vac Input
- General description:
- Operating temperature: -40 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 66 x 125 x 102 mm(W*H*D) without bracket
- RJ45 pin out assignment: (10M/100M/1G/5G)
- RJ-45 input (data only) and RJ-45 output (data & power) all 4 pairs
- Note : the model is isolated design, the output +/- can be shorted to ground (FG).
- DIN-PS100-56PNN is Pin1,2=(-),3,6=(+)
- DIN-PS100-56PNR is Pin1,2=(+),3,6=(-)
- CONNECTOR FIGURE : P1
- 5EHDRM-05P
- Pin 2&4 = NC = No Connect
- Pin 1 = AC/L
- Pin 3 = AC/N
- Pin 5 = EARTH = FG
- Indicator:
- Indicators on front panel, output RJ45
- LED1 : PWR/PSE ready
- JP2 : GREEN indicates 802.3bt Output –OK
