Product

DIN PoE
Key Specifications/Special Features
  • INPUT :
    • Input voltage: AC 100V ~ 240V
    • Input current: 1.10A at 100Vac @F.L PF > 0.98 0.46A at 240Vac @F.L PF > 0.95
    • Input frequency : 50/60Hz
  • OUTPUT : 
    • Output voltage and current: +56V
    • Max load: 1.6A
    • Power: 90W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Noise bandwidth is from DC to 20Mhz. 
    • Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point. 
  • Efficiency: 88% min at Full Load , 100Vac ~ 240Vac Input Voltage
  • Protection:
    • Short-circuit protected
    • output Short GND Terminal will not damage the Power Supply will AutoRecover when Load status going to normally
    • Over Voltage Protection : 58V ~ 63V 
    • Over Current Limits : 802.3bt Limits @100V ~ 240Vac
  • EMC : Meet FCC Class A EN55032 Class A
  • SAFETY STANDARD : Meet EN60950-1
  • Hold up time :8mS min. at maximum load &120Vac Input
  • General description:
    • Operating temperature: -40 to 50 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5 to 90%
    • Free air cooling
    • Size: 66 x 125 x 102 mm(W*H*D) without bracket
  • RJ45 pin out assignment: (10M/100M/1G/5G)
  • RJ-45 input (data only) and RJ-45 output (data & power) all 4 pairs
    • Note : the model is isolated design, the output +/- can be shorted to ground (FG).
    • DIN-PS100-56PNN is Pin1,2=(-),3,6=(+)
    • DIN-PS100-56PNR is Pin1,2=(+),3,6=(-)
  • CONNECTOR FIGURE :  P1
    • 5EHDRM-05P
    • Pin 2&4 = NC = No Connect
    • Pin 1 = AC/L
    • Pin 3 = AC/N
    • Pin 5 = EARTH = FG
  • Indicator:
    • Indicators on front panel, output RJ45
    • LED1 : PWR/PSE ready
    • JP2 : GREEN indicates 802.3bt Output –OK 
Loading...
History
    3Inquiry Cart