MIT-89GD-T1-IP

Outdoor PoE Injector with Lightning Surge protector in IP66 waterproof Anti-UV plastic box, DC/DC, 802.3bt, 56V 90W output

Key Specifications/Special Features
  • INPUT :
    • Input voltage: 40Vdc to 60Vdc Normal = 56V
    • Input current: 2.6A at 40Vdc @F.L / 1.9A at 56Vdc @F.L / 1.8A at 60Vdc @F.L
    • *Note: isolated design, both positive and negative input are all available
  • OUTPUT : 
    • Output voltage and current: 56V
    • Max load: 1.61A
    • Power: 90W 
    • Minimum load: 0.01A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Total power: 90W
    • Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point. 
    • Output up to 112W at 50C. De-rate output once above 50C, 100W
      maximum when 70C
  • Efficiency:   80% min at Full Load , 40Vdc ~ 72Vdc Input Voltage
  • Protection: 
    • Short-circuit protection
    • Output Short GND Terminal will not damage the Power Supply and will Auto-Reset.
    • Input with Fuse Protection.  
    • Input Reverse Protection------NO Work
    • Over Current Limits : 802.3BT Class 8 (96.6W)@All DC Input F.L
    • INPUT LOW Voltage Protection Point : 33.2V±0.3V
    • OUTPUT Over Voltage Protection Point : 59V±0.5V
  • EMC : meet EN55032 Class B, FCC Class B
  • SAFETY STANDARD : meet EN62368-1.
  • General description: 
    • Operating temperature: -40 to 70 degree Celsius 
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5 to 90% 
    • Free air cooling
    • Size: 268*88*207 mm(L*W*H) 
    • Waterproof: IP66
    • Anti-UV plastic enclosure
    • Light Pole mountable: with 6” hose clamp
  • RJ45 Pin Assignment:1000MBASE
  • RJ-45 input (data only) and RJ-45 output (data & power)
  • Indicator
    • LED1(RED) Indicate POE Output no valid detection.
    • LED2(GREEN) Indicate POE Output 802.3BT at PD detected
***The I/O ports normally use waterproof cable gland, but also can be upgraded to waterproof RJ45 connector at additional cost. And then the PN will be MIT-89GD-T1-IPRJ***
Main Export Markets
Payment Details
  • Payment in Advance

Inquiry

View Picture
Selected Items
Estimate Purchasing Quantity
Estimate Purchasing Schedule
Information of Contact Person

(Please enter full telephone number, including Country code, Area code. )

Company Information

( Including http:// )

(full address please)

(Please enter full telephone number, including Country code, Area code.)

Others

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.