IP67 35W AC/DC Gigabit Industrial PoE Injector, M12 connector, 56V 0.625A Output, 802.3at, -40C~+70C, MIT-33G-56B1N-M12-IP67

INPUT :
- Input Voltage: AC 100V ~ 240V (used with custom power cord)
- Input Frequency : 50 ~ 60hz
- Input Current : 0.86A at 100Vac @F.L / 0.38A at 240Vac @F.L
- Inrush current: 25A Max at 120Vac & 50A Max at 230Vac
OUTPUT :
- Output voltage and current: 56V
- Max load: 0.625A
- Power: 35W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 2%
- Total power: 35W
- Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 85% min. at AC 100V ~ 240V Input @F.L
Protection:
- Short Circuit Protection
- output Short GND Terminal will not damage the Power Supply will Auto Recover when Load status going to normally.
- Over Voltage Protection : 59V ~ 63V
- Over Current Limits : 802.3at Limits(~ 0.71A) @100V ~ 240Vac
- Input with Fuse Protection
- EMC : Meet FCC Class B EN55032 Class B
- SAFETY STANDARD : Meet EN62368-1
General description:
- Operating temperature: -40 to +70 degree Celsius
- Storage temperature: -40 to +85 degree Celsius
- Operating humidity: 5% - 90% non-condensing
- Free air cooling
- SIZE : 160*106*46 (L*W*H)m/m (without bracket)
Indicates:
- LED(RED) Indicate power on.
- Input connector: The device provides M12 A-Code 3 pin connector on the front panel for input, the pin assignments as the figure.
- M12 X-Code Input (Data Only) and M12 X-Code Output (Data & Power)

Our Products

MIT-33G-56B1N-M12-IP67