DC/DC, 802.3at Gigabit PoE Injector with 100~125VDC Input and 56V/0.625A Output, -40C~+40C, MIT-110G-56D

INPUT :
- Input Voltage: 100Vdc to 125Vdc (typical=110V)
- Input Current: 0.42A at 100Vdc; 0.34A at 125Vdc @full load
- Inrush Current: 25A Max at 125Vdc
OUTPUT :
- Output voltage and current: +56V
- Max load: 0.625A
- Power: Output 35W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 35W
- Noise bandwidth is from DC to 20Mhz.
- Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity.
Efficiency : 85% min. at DC100V ~ 125V Input @F.L
Protection :
- Short Circuit Protection
- Output Short GND Terminal will not damage the Power Supply and will Auto-Recover when Load status back to normal.
- Over Voltage Protection : 58V ~ 60V
- Over Current Limits : 115% ~ 125% @100V ~ 125Vac
- P IN-1,2 Control PSE Output ON/OFF
- Input with Fuse Protection.
General description :
- Operating temperature: -40 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% - 90% (non-condensing)with conformal coating on PCBA
- Free air cooling
- Dimensions: 125*72*38 (L)*(W)*(H) unit: m/m
- RJ-45 input (data only) and RJ-45 output (data & power)
- Power-Hub RJ45 Input Socket (per channel) data & Power-Connected to DTE
- RJ45 Connection and pin out: @1000MBASE
- Plastic case material: PC
- Plastic case color: gray
Indicator：
- LED (RED) indicate PWR – OK
- LED (GREEN) indicate POE Output –OK

Our Products

MIT-110G-56D
Hot Merchandise