5-port Gigabit PoE Switch, 10V~60VDC input, 4x 56V 802.3bt compliant PoE output, operation temperature -40C~+50C,, PSE-SW5B-490DC

INPUT :
- Input voltage: DC : 10V~ 60V
- Input current: 45.7A @10Vin at F.L; 18.1A @24Vin at F.L; 8.83A @48Vin at F.L; 7.20A @60Vin at F.L
- *Note: For input voltages ranging from 10-18V DC, a wire gauge of #12 AWG or higher is recommended.
OUTPUT :
- Output voltage and current: 56V/port
- Max load: 1.6A/port
- Power: 90W maximum/port
- Minimum load 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 360W
- Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 80% min 10V ~ 35V, 86%min 36V ~ 60V dc Input Voltage at Full Load
Protection:
- Short-circuit protected
- Output Short GND Terminal will not damage the Power Supply and will auto-Reset.
- Input with Fuse Protection
- Over Current : 802.3bt Class 8 (96.6W)@All DC Input F.L
- Input polarity Reverse Protection----No working, will not damage the Power Supply
- Input Over low Voltage Protection : 8V ~ 9V Turn-off Input
- Surge protection on data input ports
General description:
- Operating temperature: -40 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 431 x 43 x 198 mm (W*H*D)
RJ45 Pin Assignment： @1000M
RJ-45 input (data only) and RJ-45 output (data & power)
Indicator (on front panel, output RJ45 ) :
- power ready: YELLOW on.
- 802.3bt output: GREEN on.

More details please see the Specification.

Our Products

PSE-SW5B-490DC
Hot Merchandise