MIT-20G-2456PNNN
24VDC Input 70W Output High-power PoE Injector operation temperature -40C~+50C, Passive UPOE
Key Specifications/Special Features
- INPUT :
- Input Voltage: 18Vdc to 36Vdc Normal = 24V
- Input Current: 3.65A at 24Vdc @ Full Load
- OUTPUT :
- Output voltage and current: +56V1
- Max load: 1.25A
- Power: 70W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 70W
- Noise bandwidth is from DC to 20Mhz
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 80% min at Full Load , 18Vdc ~ 36Vdc Input Voltage
- Protection:
- Short Circuit Protection
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
- Input with Fuse Protection.
- Safety Standard : meet IEC/EN62368-1
- EMC : meet FCC Class B , EN55032 Class B
- Over Current : 110% ~ 130% @All DC Input F.L
- Input Reverse Protection------NO Work
- General description:
- Operating temperature: -40 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% - 90% non-condensing
- Free air cooling
- SIZE : 125*72*38 (L)*(W)*(H) unit: m/m
- DIN rail mountable : DIN rail clip kit optioned
- RJ45 Pin Assignment： @1000M
- RJ-45 PoE input (data only) and RJ-45 PoE output (data and power)
- Indicates:
- the LED on top cover light GREEN when Power Ready
- the LEDs on the right RJ45 (the OUT port) indicate voltage output, the left LED light on for data pairs (pin 1236), the right LED light on for spare pairs (pin 4578). The two LEDs all on, then the main LED on top cover will be on, any one of the two LEDs off, the main LED off.
Main Export Markets
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australia
Our Products
Payment Details
- Payment in Advance
