WORLDWIDE
Product
Home > Product > AC PoE > 24VAC PoE
24VAC PoE
Key Specifications/Special Features
- INPUT :
- Input voltage: 22Vac to 35Vac Normal = 24Vac ; 20Vdc to 48Vdc Normal = 24Vdc
- Input current: 4.42A at 24Vac/50hz F.L ; 4.82A at 22Vac/50hz F.L ; 3.12A at 35Vac/50hz F.L ; 4.40A at 24Vdc F.L
- Input Frequency: 50/60hz
- Power Factor: >0.95(at F.L)
- OUTPUT :
- Output voltage and current: +56V
- Max load: 1.6A
- Power: 90W
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 90W
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 80% min at Full Load , 22Vac ~ 35Vac Input Voltage
- Protection:
- Short-circuit protected
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset.
- Input with Fuse Protection.
- Over Current: 802.3bt Limits @All AC Input F.L
- Safety Standard : meet EN62368-1
- EMC : meet FCC Class B , EN55032 Class B
- General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 140*150*40 (L*W*H)m/m DIN rail mountable
- For AC input: use AC1 (pin3(L),5(N)) to input AC or use AC2 (pin 2(L),4(N)) to input AC.
- For DC input: Use pin 4 or 5 and pin 2 or 3 to input DC, no matter what polarity, there is bridge inside.
- Indication:
- LED1(RED) Indicate POE Output no valid detection.
- LED2(GREEN) Indicate POE Output 802.3af/at/bt PD detected
- RJ45 Pin Assignment： @1000M/5000M
- RJ-45 input (data only) and RJ-45 output (data & power)