DIN-POE11-15456B1N
Industrial Gigabit PoE Injector (midspan), 66-154VDC INPUT, 56VDC 60W PoE OUTPUT, DIN RAIL MOUNT, 802.3at Alt-B
Key Specifications/Special Features
- INPUT :
- Input voltage: DC : 66Vdc to 154Vdc
- Input current: 1.07A at 66Vdc / 0.46A at 154Vdc
- Input Frequency : 50/60HZ (47 ~ 63Hz)
- OUTPUT :
- Output voltage and current: 56V
- Max load: 1.07A
- Power: 60W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 60W
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency: 85% min at Full Load , 66Vdc ~ 154Vdc Input Voltage
- Protection:
- Short-circuit protection
- Output short will not damage the model, it will auto-recover when load back to normal.
- Input with Fuse Protection. at P.C.B
- Input Reverse will not damage the Power Supply: PWR Turn---off
- Input Over low Voltage Protection : 62V ~ 64V Turn-off Input
- Surge protection : 8.5KV
- General description:
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90% (40 Degree)
- Free air cooling
- Size: 46 x 125 x 102 mm(W*H*D)
- RJ45 Pin Assignment：10M/100M/1000M
- RJ-45 input (data only) and RJ-45 output (data & power)
- Indicator(on output RJ45)
- LED1 (upper) GREEN indicates POE Output –OK (4,5/7,8)
- LED2 (lower) (for 1236, unused)
- PWR indicator: GREEN indicates PWR – OK
- CONNECTOR FIGURE
- Input: HD-515RC (P2) Allow two inputs for redundant.
